Lots of products and information for air compressors
From the Manufacturer
DEWALT D55276 Heavy-Duty 5.5 Horsepower 17 Gallon Wheeled Oiled Gas Single Hot Dog Compressor
Review
At just a foot high and less than two feet wide out of the carton, this compressor was quite a bit smaller than we expected, so to be fair, we quickly lowered our expectations. The joke was on us, though, because this little powerhouse just doesnt quit, and we learned that you cant judge a compressor by its size. We should have known better when the first thing we saw was the word “Emglo” emblazoned in black on that famous DeWalt yellow. Emglos half-century in the compressor business is evident in this model, and with a couple of small exceptions (well get into that in a minute), we dont think anyone could make a finer piece of air power. Structurally, its top-notch. DeWalt/Emglos great new roll-cage shape protects your investment in the shop, in the truck and at the job site, and the gauges are easier to read than many weve squinted at over the years. It weighs in at around 60 pounds, and the way the handles designed, you can carry it much like a suitcase without overexertion. To let out any moisture thats accumulated, its just an easy turn of the ball-valve tank drain, then just wrap the cord on its holder and youre ready to go. In the performance department, we have to say this machine blew us away, moving 4.5 cfm at 100 psi. Now, this may be a plus or a minus in your book, but we liked the fact that the compressor is factory set to power on at 100 psi an+d shut off at 120 psi, and the cycle time was under 15 seconds. We didnt find it unusually loud, but were given to wearing hearing protection with tools such as this one anyway (and we hope you are, too.) It has air aplenty for two nailers at once, and with that fast recovery, the job will get done in no time. If we had to say what we didnt like, there are two items on that list: First, we thought the power switch would have been better seated on the front panel rather than the side, but thats a miniscule complaint. What you do want to watch out for, though, is the proximity of the reset switch to parts that get searingly hot while in use. A little care will save you some pain. In balance, this is one of the best compressors weve seen for the size, power, ruggedness and incredible portability it offers. Heres to a great pairing of two great toolmakers.–Kris Jensen-Van Heste
DeWalt’s 2-horsepower, 4-gallon compressor features an oil-lubricated design with a cast-iron cylinder to guarantee job site durability. The D55155 is overload protected, as well, and delivers 4-1/2 cfm at 100 psi while still drawing less than 15 amps. The new roll-cage design and integrated control panel protects the compressor and the controls from accidental damage. The panel houses two large easy-to-read gauges, the regulator, and two universal quick couples. Carrying the compressor is easy, too: the flat design lets the user tote the compressor comfortably like a suitcase. Other features include a ball-type tank drain and a wrap area to store the power cord. The 4-gallon tank is ASME approved and CSA certified. The package comes with the initial fill of DeWalt synthetic air compressor oil.
See all
(more…)
From the Manufacturer
DEWALT D55270 5-1/2 Horsepower 8 Gallon Wheeled Oiled Twin Pontoon Gas Compressor
The DeWalt D55270 5-1/2 Horsepower 8 Gallon Wheeled Oiled Twin Pontoon Gas Compressor features a 5.5-horsepower Honda engine that delivers 8.9 cubic feet per minute at 100 psi. The compressor’s 8-gallon wheelbarrow design and pneumatic tire allows for mobility on nearly any job site. The twin-cylinder, cast-iron, oil-lubricated pump is designed and built to last, while the automatic throttle control allows the unit to idle and conserve fuel when air is not required. Other features include a braided steel after-cooler, heavy-duty belt guard, and a 3/8-inch regulator with gauges. The unit’s ball valve drain allows for quick and thorough tank draining. This low-profile compressor measures 25 x 18.25 x 43-inches (H x W x L) and weighs 160 pounds. The DeWalt D55270 comes complete with the initial fill of DeWalt synthetic air compressor oil. A one-year limited warranty is included.
Power your pneumatic tools with this handy, yet dynamic 4.7 amp, 1.5 horsepower dual-tank compressor. This compressor features an innovative motor that supplies 6.5 cfm at 100 psi, providing a speedy recuperation and Emglo’s demonstrated dependable twin cylinder, cast iron, oil lubricated pump. Designed with rugged pneumatic tires and low-profile construction, this unit is convenient to transport on the job. Other innovative features include fast and complete drainage with the ball drain valve and to on/off continual run feature, which decreases the chance of tripping the breaker.
The DeWalt D55570 Heavy Duty 1.5 HP 8 Gallon Electric Wheeled Portable Compressor with Dual Voltage and Dual Control provides 6.5 CFM delivered at 100 psi for quick recovery. With a low-profile design and a built-in fully-pneumatic tire to improve job site mobility, this compressor also comes with a twin cylinder, cast iron, and oil lubricated pump with Emglo’s 50 years of proven durability and reliability. Other compressor features include a dual control feature that allows start/stop or constant run operation, and a dual voltage feature that allows easy switching from 120- to 240-volt operation. Backed by a manufacturer’s 1-year warranty, this compressor comes with DeWalt synthetic compressor oil and a 3/8-inch NPT pressure regulator.
From the Manufacturer
DEWALT D55570 15 Amp / 8 Amp 1-1/2 Horsepower 8-Gallon Wheeled Oiled Twin Pontoon Compressor with Dual Voltage and Dual Control
From the Manufacturer
DEWALT D55273 Heavy-Duty 5-1/2 Horsepower 10.5 Gallon Oiled Gas Wheeled Compressor
From the Manufacturer
Factory-Reconditioned DEWALT D55273R Heavy-Duty 5-1/2 Horsepower 10.5 Gallon Oiled Gas Wheeled Compressor
From the Manufacturer
DEWALT D55271 8 Horsepower 8-Gallon Oiled Twin Pontoon Gas Compressor
From the Manufacturer
The 8-horsepower Honda engine delivers 16.2 cubic feet per minute @ 100 psi, while the low-profile design of the compressor means less operator fatigue and maximum job site maneuverability. The quad-cylinder, cast-iron, oil-lubricated pump has Emglo’s 50 years of proven durability and reliability behind it. Features include a beefed-up, totally enclosed steel belt guard, pneumatic tire, brass valves and fittings, stainless-steel braided after-cool tube, ball valve drain, and constant run control so the engine runs idle when not under load. The compressor includes a 3/8-inch regulator and an initial fill of DeWalt synthetic air compressor oil. Features16.2 cubic feet per minute delivered at 100 psi for high-volume applications Quad-cylinder, cast-iron, oil-lubricated pump with Emglo’s 50 years of proven durability and reliability Low-profile design for easy maneuverability 8-horsepower Honda OHV GX gas engine provides proven reliability and durability Low-oil shutoff provides greater engine protection Automatic idle control for reduced fuel consumption Pneumatic tire improves worksite mobility Ball valve drain allows for quick and thorough tank draining SpecificationsDrive: belt drive Horsepower: 8 hp Tank size: 8 gallons Power supply: Honda gas OHV GX engine Cubic feet per minute at 100 psi: 16.2 cfm Pump speed: 890 rpm Tool length: 43 inches Tool width: 18.25 inches Tool height: 27.75 inches Tool weight: 213 lbs. Shipping weight: 269 lbs. IncludesDeWalt synthetic compressor oil 3/8-inch NPT pressure regulator Warranty This DeWalt high-performance industrial tool comes with a warranty package that includes: 30-day, no-risk satisfaction guarantee One-year free service contract One-year warranty
From the Manufacturer
This 60 Gallon vertical compressor has a space saving design, powerful 3.0 (running) horsepower motor, over 35% quieter and 60 degrees cooler than aluminum pumps with cast iron cylinder sleeves.
Solid oil lubricated twin cylinder “V” style cast iron pump has oversized automotive style filters. Quiet operation with high quality, easy-to-read gauges and oil sight glass. Durable and safe 60 gallon ASME code tank. Air flow SCFM powers a wide variety of air tools. SPECIFICATIONS: 240v, 11.5/10.2 CFM at 40/90 PSI. 135 maximum PSI, 3.2 HP, 60 gallon tank. 3,000 hours product life.
Power your pneumatic tools without electricity with this handy, yet dynamic 4 gallon hot dog gas compressor. This innovative compressor is chock-full of features intended to extend lifespan and increase durability. The Honda OHV GX engine is industry verified in reliability and endurance is further increased with the oil lubricated pump. It also includes an automatic-idle feature, which decrease fuel usage. All of these guarded features equal one compressor with superior resilience.
